Blister pack shading with radio button F2T55E and radio actuator for shading elements and roller shutters FSB61NP-230V. Smart home sensor and smart home actuator. F2T55E: radio button pure white glossy with print for individual installation 80x80x15mm or installation in the E-Design55 switch system. Generates the energy for radio telegrams even when the button is pressed, therefore no connection cable and no standby loss. Radio buttons with a rocker can send two evaluable signals: press the rocker up and press the rocker down. The mounting plate can be screwed onto a flat surface or stuck to the wall, glass or furniture with the included adhesive film. The sleeves in the box are used for screw fastening over a 55 mm switch box. FSB61NP-230V: Radio actuator for shading elements and roller shutters 1+1 normally open contact not potential free 4A/250V AC. Encrypted radio, bidirectional radio and repeater function can be switched on. Standby loss only 0.8 watts. For built-in installation. 45mm long, 45mm wide, 33mm deep. Local supply, switching and control voltage 230V. If the supply voltage fails, the device is switched off in a defined manner. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional 230V control button that may be mounted in front of it.
Property | Value |
Number of relays: | 1 |
Mounting type: | Flush-mounted |
Radio frequency: | 868 MHz |
Number of commands: | 32 |
Material: | Plastic |
Halogen-free: | yes |
Surface: | other |
Mounting type: | other |
Material quality: | Thermoplastic |
Suitable for protection class (IP): | IP20 |
Suitable for dimmer: | no |
Suitable for pulse pushers: | yes |
Suitable for roller shutter switches: | yes |
Suitable for switches: | yes |
Rolling code system: | yes |
In the housing: | yes |
In the tube base housing: | no |
As a module/circuit board: | no |
Touch operation: | yes |
Switching operation: | yes |
With radio handheld transmitter: | no |
With radio coding device: | no |
With radio button: | no |
Suitable for blind switches: | yes |
Suitable for blind/roller shutter switches: | yes |
Transparent: | no |