Description
Features
Reviews
Wireless Powernet phase coupler for capacitive coupling between 2 different outer conductors. Standby loss only 0.2 watts. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 division unit = 18mm wide, 58mm deep. Voltage between the two outer conductors: 400V/50Hz. Frequency range 115-132kHz. The phase coupler increases the capacitive coupling between 2 different outer conductors if, for example, the cables within the installation are not laid parallel for at least a few meters (as a web or sheathed cable). Attention! The phase coupler may only be connected on the input side of the circuit breaker.
| Property | Value |
| KNX bus system: | no |
| Radio bus system: | yes |
| Powernet bus system: | yes |
| Nominal voltage: | 230 V |
| Mounting type: | REG |
| Number of phases: | 3 |
| Width in pitch units: | 1 |
| Bus system LON: | no |
| Other bus systems: | other |
| Bus system KNX radio: | no |
Features
Manufacturer
HAN
30000051
GTIN
4010312311769
Other bus systems
Other
Number of phases
3
Width in pitch units
1
Bus system radio bus
Yes
KNX bus system
No
KNX radio bus system
No
LON bus system
No
Powernet bus system
Yes
Mounting type
REG
Nominal voltage
230V
No reviews yet — your comment may be first.
All reviews 0
