Wireless outdoor motion and brightness sensor, pure white, 130x85x100mm, protection class IP55. 1 normally open contact, not potential-free, 10A/250V AC, incandescent lamps 2300 watts. Standby loss only 0.9 watts. Smart home sensor. Motion sensor for automatic lighting control depending on movement and brightness. The wireless sensor sends button telegrams to the Eltako building radio when there is movement or no movement. Suitable for wall mounting outdoors, for entrances, garages, gardens, corridors, parks, etc. Only intended for installation outside of the reach of the user. Supply and switching voltage 230V. Sensor head can be rotated horizontally by plus or minus 90 degrees and tilted downwards by 30 degrees, detection angle 180 degrees, horizontal detection range max. 12 m, frontal detection range max. 5 m, mounting height 2 to 4 m, additional creep guard diameter 6 m. Brightness switching value adjustable from 5 to 1000 lux and follow-up time from 1 second to 20 minutes. Mixed light measurement suitable for controlling LED, fluorescent, incandescent and halogen lamps. Zero-crossing switching for relay-friendly switching and high lamp loads. Teach-in of the current brightness value, pulse function, test function for checking the detection range. Installation on flush-mounted box (60 mm) possible. One-hand plug-in base installation. Immediate commissioning possible thanks to pre-setting. Setting elements attached in a protected manner. Blind terminal for protective conductor. 2 screws and dowels each are included. Teaching a radio sensor into an actuator: The radio sensor is taught as a universal button into an actuator in learning mode. To do this, switch on the supply voltage of the radio sensor. The internal relay switches on and a button telegram is sent; the previously flashing LED in the actuator goes out. The actuator must be operated in the ER function without EW time. The radio sensor can be taught into the following actuators and into the building radio visualization and control software: FSR14, FSR61, FSR71.
| Property | Value |
| Mounting height: | 2 m |
| Mounting type: | Surface-mounted |
| Design: | Motion detector |
| Constant light control: | no |
| Adjustable response sensitivity: | no |
| Horizontal detection angle: | 180 ° |
| Anti-creep protection/rear field monitoring: | yes |
| Max. range to one side: | 12 m |
| Max. Frontal range: | 5 m |
| Detection field diameter on floor: | 12 m |
| HVAC control: | yes |
| Response brightness adjustable: | no |
| Networkable: | yes |
| Teach function for response brightness: | yes |
| Dimming function with dimming insert: | no |
| Suitable for protection class (IP): | IP55 |
| Suitable for wireless transmission: | yes |
| Color: | white |
| Staircase monitoring: | no |
| Halogen-free: | yes |
| Animal corridor: | no |
| Material: | Plastic |
| Material quality: | Thermoplastic |
| Self-learning switch-off delay: | no |
| Operating mode switch: | no |
