Blister pack dimming with radio button F2T55E-wg and radio universal dimming actuator FD62NPN-230V. Smart home sensor and smart home actuator. F2T55E-wg: radio 2-channel button in E-Design55, 80x80mm outside, frame inner dimensions 55x55mm, 15mm high. Generates the energy for radio telegrams even when the button is pressed, therefore no connection cable and no standby loss. With rocker. Smart home sensor. Radio buttons with a rocker can send two evaluable signals: press the rocker up and press the rocker down. The mounting plate can be screwed onto a flat surface or stuck to the wall, glass or furniture with the included adhesive film. The sleeves in the box are used for screw fastening over a 55mm switch box. FD62NPN-230V: wireless universal dimmer actuator. With power MOSFET. Dimmable 230V LED lamps in trailing edge mode up to 300W, or in leading edge mode up to 100W, depending on the ventilation conditions. 230V incandescent and halogen lamps up to 300W, depending on the ventilation conditions. No inductive (wound) transformers. With children's room and snooze function. No minimum load. Standby loss only 0.5 watts. For built-in installation. 49x51mm, 20mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2mm² to 2.5mm². Up to 32 wireless universal buttons, wireless direction buttons, wireless central control buttons and motion sensors can be taught in using the convenient tap technology. Bidirectional radio can be activated. Switching in zero crossing with soft on and soft off to protect the lamp. Local supply, switching and control voltage 230V. The set brightness level is saved when switched off (memory). If the supply voltage fails, the device is switched off in a defined manner. Automatic electronic overload protection and overtemperature shutdown. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional 230V control button that may be mounted in front of it. A glow lamp current is not permitted.
| Property | Value |
| Mounting type: | Flush-mounted |
| Radio frequency: | 868 MHz |
| Number of commands: | 32 |
| Color: | blue |
| Material: | Plastic |
| Halogen-free: | yes |
| Surface: | other |
| Mounting type: | other |
| Material quality: | Thermoplastic |
| Surface finish: | matt |
| Suitable for protection class (IP): | IP20 |
| Suitable for dimmer: | yes |
| Suitable for pulse pushers: | no |
| Suitable for roller shutter switches: | no |
| Suitable for switches: | no |
| Rolling code system: | yes |
| In the housing: | yes |
| In the tube base housing: | no |
| As a module/circuit board: | no |
| Touch operation: | yes |
| Switching operation: | no |
| With radio handheld transmitter: | no |
| With radio coding device: | no |
| With radio button: | no |
| Suitable for blind switches: | no |
| Suitable for blind/roller shutter switches: | no |
| Transparent: | no |
