Eltako 30001067 BPB55-J62 shading wireless push button set

Blister pack shading with radio button F2T55E-wg and radio blind and roller shutter actuator FJ62NP-230V. Smart home sensor and smart home actuator. F2T55E-wg: radio 2-channel button in E-Design55, 80x80mm outside, frame inner dimensions 55x55mm, 15mm high. Generates the energy for radio telegrams even when the button is pressed, therefore no connection cable and no standby loss. With rocker. Smart home sensor. Radio buttons with a rocker can send two evaluable signals: press the rocker up and press the rocker down. The mounting plate can be screwed onto a flat surface or stuck to the wall, glass or furniture with the included adhesive film. The sleeves in the box are used for screw fastening over a 55mm switch box. FJ62NP-230V: Radio blind and roller shutter actuator 1+1 normally open 4A/250V AC, not potential-free, for a shading element motor 230V AC. Standby loss only 0.6 watts. For built-in installation. 49x51mm, 20mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2m² to 2.5m². Up to 32 radio universal buttons, radio direction buttons and radio central control buttons can be programmed using the convenient tap technology. Contact switching at zero crossing. Bidirectional radio can be activated. Supply, switching and control voltage locally 230V. If the supply voltage fails, it is switched off in a defined manner. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional control button that may be mounted in front of it. Either separate local control inputs for up and down as direction buttons, or these two inputs are bridged and controlled with a single button as a universal button. The direction is then changed by interrupting the control. A glow lamp current is not permitted. A radio button with the function up, stop, down, stop can be taught in as a universal button like the local button, or a radio button like a roller shutter double button can be taught in as a direction button with press up to up and press down to down. A short tap interrupts the movement immediately. Central control buttons can also be taught in without priority. A tap-turn function can be activated: the universal button, direction button and the local button initially act statically and thus allow blinds to be turned. Only after control> 1 second does it switch to dynamic. When controlled via the GFVS software, travel commands for up and down can be started with the exact travel time specified. Since the actuator reports back the exact time traveled after each activity, even when movement is triggered by a button, the position of the shading is always displayed correctly in the GFVS software. When the upper and lower end positions are reached, the position is automatically synchronized. If a radio window contact is programmed, a lock-out protection is set up when the window or door is open, which prevents central off, timer off and GFVS off commands.