Wireless powerline gateway. Bidirectional. Standby loss only 0.4 watts. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 2 division units = 36mm wide, 58mm deep. Supply voltage: 230V. Connection to the Eltako RS485 bus. Cross-wiring of bus and power supply with jumper. This gateway translates the telegrams from radio and powerline in both directions. Operation in conjunction with FAM14 or FTS14KS. Control functions via Professional Smart Home Controller for dimmer, heating and roller shutter control are also possible. All powerline telegrams from the power grid are automatically translated into RS485 bus telegrams and, if necessary, also sent by connected FTD14 as radio telegrams. Only radio or RS485 bus telegrams that have been taught into the FPLG14 are translated into powerline telegrams and modulated into the power grid. Up to 120 different addresses. The programming is carried out using rotary switches on the front or with PCT14 in accordance with the operating instructions.
| Property | Value |
| Width in division units: | 2 |
| Mounting type: | REG |
| Other bus systems: | without |
| Protocol: | other |
| KNX bus system: | no |
| With LED display: | yes |
| Web server: | no |
| Design: | Wireless interface manufacturer-specific |
| Bus system radio bus: | yes |
| Bus system Powernet: | yes |
| Bus system LON: | no |
| Disassembly protection: | no |
| Updateable: | no |
| Provider dependent: | no |
| Visualization: | yes |
| Radio interface: | yes |
| IR interface: | no |
| KNX radio bus system: | no |
| Bidirectional radio: | yes |
