Wireless humidity temperature sensor, pure white, glossy, for single installation 80x80x17mm or installation in the E-Design55 switch system. With battery (lifespan 5 years). Smart home sensor. The wireless humidity temperature sensor continuously measures the relative humidity between 0 and 100% (plus or minus 5%) and the temperature between -20 and +60 degrees C (plus or minus 0.5 degrees C). If there is a change, it sends a data telegram to the Eltako building radio within 2 minutes. If there is no change, a status telegram is sent every 10 minutes. The transmission interval can be shortened to 1 or 5 minutes by inserting the jumper according to the operating instructions. Evaluation via the F2L14 actuator, the Professional Smart Home Controllers MiniSafe, MiniSafe REG, SafeIV, TouchIV etc. with the Eltako building radio app GFA4. For screw fastening we recommend stainless steel countersunk screws 2, 9x25mm, DIN 7982 C. Both with dowels 5x25mm and on 55mm switch boxes. 2 stainless steel countersunk screws 2.9x25mm and dowels 5x25mm are included.
| Property | Value |
| Protection class (IP): | IP20 |
| Radio frequency: | 868 MHz |
| Range: | 30 m |
| Number of commands: | 35 |
| Power supply: | other |
| Rolling code system: | no |
| Wireless button flush-mounted: | no |
| Wireless button on the surface: | no |
| Keyboard protective cover: | no |
