Eltako 30100537 FD62NP-230V dimming actuator radio bus

Wireless universal dimmer actuator without N connection. With power MOSFET. 230V incandescent and halogen lamps up to 200W, depending on the ventilation conditions. Dimmable 230V LED lamps in 'trailing edge' operating mode up to 200W or in 'leading edge' operating mode up to 40W, depending on the ventilation conditions. Minimum load with 'trailing edge' 20W or with 'leading edge' 8W. No inductive (wound) transformers. With children's room and snooze function. Standby loss only 0.6 watts. For built-in installation. 49x51mm, 20mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2mm to 2.5mm. Using the convenient tapping technology, up to 32 wireless universal buttons, wireless direction buttons, wireless central control buttons and motion sensors can be programmed. Bidirectional wireless can be activated. Zero-crossing switching with soft on and soft off to protect the lamp. Local supply, switching and control voltage 230V. The set brightness level is saved when switched off (memory). If the supply voltage fails, the device is switched off in a defined manner. Automatic electronic overload protection and overtemperature shutdown. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally with a conventional 230V control button that may be mounted in front of it. A glow lamp current is not permitted.