4-channel DALI LED dimmer for luminaire installation and flush-mounted boxes. 59x33x15mm. Protection class IP20. Standby loss only 0.12 watts. Suitable for controlling constant voltage LED modules (CV) with operating voltages from 12V to 48V. DT6 operating mode: separate control of the channels via 4 DALI addresses. Colour&Dim operating mode: control via 2 DALI addresses, one for adjusting the brightness and one for adjusting the colour. SwitchDim2: operation via 2 button inputs enables control of brightness and colour without DALI. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Supply voltage from 12V to 48V DC (corresponding to the operating voltage of the LED modules). Connection current 8 A. The maximum connection current can be distributed among the channels as desired. High efficiency. Configuration via PC software DALI-Cockpit and DALI-USB interface. Operating modes: The device has several operating modes: DT6 (delivery state): In this operating mode, each channel is controlled via a separate DALI address (Device Type 6). Alternatively, operation can also be carried out via two button inputs (SwitchDim2): SwD1: Brightness. Short button press: On/Off. Long button press: Dimming. SwD2: Scene switch (short button press). Colour&Dim: This operating mode is used to control RGB lights. Control is via 2 DALI addresses, with one address influencing the brightness and the other the channel allocation (e.g. colour). The Colour&Dim mode enables the colour to be adjusted without affecting the brightness and vice versa. The adjustment is made using DALI standard commands such as Dim Up/Down and can therefore be carried out using all common controls and gateways (e.g. KNX). This control option offers an alternative to the DT8-RGBWAF mode. Can be operated via DALI or SwitchDim2: DALI address 1, SwD1: brightness. DALI address 2, SwD2: color.
| Property | Value |
| Device height: | 59 mm |
| Device width: | 33 mm |
| Device depth: | 15 mm |
| Connection type: | Plug-in terminal |
| Wire cross section: | 1.5 mm² |
| Mounting type: | other |
| Dimming phase control: | no |
| Dimming trailing edge: | no |
| Nominal voltage: | 12 to 48 V |
| Color: | gray |
| Suitable for protection class (IP): | IP20 |
| Operating method: | Push button |
| Halogen-free: | yes |
| Composition: | Basic element |
| Series dimmer: | no |
| Extension input: | no |
| Light value memory: | yes |
| Can be used with button: | yes |
| Can be used with motion detector: | no |
| Can be used with presence detector: | no |
| Can be used with timer: | no |
| Can be used with radio button: | no |
| Can be used with IR button: | no |
| Material: | plastic |
| Material quality: | thermoplastic |
| Surface: | untreated |
| Surface finish: | matt |
| Control voltage: | 9.5 to 22.5 V |
| Transparent: | no |
| App control via Bluetooth: | no |
| Min. Depth of the device box: | 15 mm |
