Description
Features
Reviews
LED downlight, 18 W for ceiling installation. Recessed light with opal cover (diffuser). High-quality housing, light body made of aluminum, white powder-coated (RAL 9003). Can be used for ceiling installation without additional accessories. Color temperature: 4000 K with minimal color tolerances. Luminous flux: 1750 lm. Good light quality. Very good system efficiency. Rated service life L80/B50 at 25 °C: 40,000 h. Operating device: on/off (already included in delivery).
| Property | Value |
| Max. System power: | 18.0 W |
| Rated luminous flux according to IEC 62722-2-1: | 1800 lm |
| Housing color: | white |
| Housing material: | aluminum |
| Protection class (IP): | IP20 |
| Outer diameter: | 240 mm |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| Installation height/depth: | 40 mm |
| With control gear: | yes |
| Suitable for recessed mounting: | yes |
| Height/depth: | 25 mm |
| With motion detector: | no |
| Color temperature: | 4000 K |
| Nominal voltage: | 220 to 240 V |
| Rated service life L80/B10 at 25 °C: | 40000 h |
| Beam angle: | extremely wide beam>80° |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device, current-controlled |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | white |
| Suitable for number of bulbs: | 1 |
| Luminous flux: | 1800 lm |
| Cover material: | Opal plastic |
| Cover of the luminaire with Thermal insulation material possible: | no |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for traverse mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| Dimming depending on operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | diffuser lens/optics/panel |
| Light emission: | direct |
| Energy efficiency class of the built-in light source: | other |
| Rated service life L70/B50 at 25 °C: | 60000 h |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 40 °C |
| Luminous intensity: | 674 cd |
| Wiring type: | Termination |
| Power factor: | 0.900000 |
| Number of poles: | 3 |
| Conductor cross-section: | 2.50 mm² |
| Connectable conductor cross-section: | 0.75 to 2.50 mm² |
| Connection type: | crimping |
| Luminaire luminous efficacy: | 100 lm/W |
| Suitable for computer workstations according to EN 12464-1: | no |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Photobiological safety according to EN 62471: | RG0 |
| Color consistency (McAdam ellipse): | SDCM1 |
Features
Energy efficiency class of the permanently installed light source
Other
Connectable conductor cross-section
0.75 to 2.50 mm²
Manufacturer
HAN
EO10299018
GTIN
4015120299018
Covering the luminaire with thermal insulation material possible
No
Connection type
Crimping
Type of wiring
Diploma
Outer diameter
240 mm
Rated lifetime L70/B50 at 25 °C
60000 hours
Rated lifetime L80/B10 at 25 °C
40000 hours
Rated luminous flux according to IEC 62722-2-1
1800lm
Rated ambient temperature according to IEC62722-2-1
-20 to 40 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Installation height/depth
40 mm
Color consistency (McAdam ellipse)
SDCM1
Color temperature
4000K
Color rendering index CRI
80-89
Version
Without
Suitable for surface mounting
No
Suitable for ceiling mounting
Yes
Suitable for flush mounting
Yes
Suitable for clamp mounting
No
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
White
Glow wire test according to IEC 60695-2-11
650 °C - 30 s
Height/Depth
25 mm
Power factor
0.900000
Conductor cross-section
2.50 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
100lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Luminous flux
1800lm
Light intensity
674 cd
Light distributor
Diffuser lens/optics/panel
Light distribution
Symmetrical
Max. system performance
18.0W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
220 to 240 V
Surface
Powder coated
Brushed surface
No
Without dimming function
Yes
Photobiological safety according to EN 62471
RG0
Number of poles
3
Reflector
White
IP protection)
IP20
Protection class
II
Voltage type
AC
Adjustability
Not adjustable
Cover material
Plastic opal
Housing material
Aluminum
No reviews yet — your comment may be first.
All reviews 0
