Presence detector with 360° detection range for ceiling mounting, range of up to 32 m, elliptical detection range of 32 m in length and 4 m in width, at a mounting height of 10 m (maximum mounting height approx. 15 m), automatic light control (channel 1) to a constant brightness level (at a height of up to 5 m) depending on presence and daylight (1 - 10 V = interface), additional switching contact (channel 2) HVAC for switching another light source or for controlling heating/ventilation/air conditioning depending on presence, 16 A high-performance relay (tungsten pre-contact), especially suitable for switching capacitive loads such as electronic ballasts, parallel-compensated fluorescent lamps, compact fluorescent lamps, energy-saving lamps, fixed factory program for immediate operational readiness. Simple programming via remote control with 'blue mode' technology, suppression of sources of interference by reducing the sensitivity via DIP switch, additional button input per channel, detector can be used as a fully or semi-automatic device (channel 1 + 2), reduction to 10% of the light output after the run-on time has elapsed as an orientation light for corridors and passageways, integrated switch-off warning Standard version as a flush-mounted device Surface-mounted or ceiling-mounted installation with accessories, cover panel and design ring can be easily changed/painted (available in the colour 'silver' as an accessory), extension of the detection area by connecting slave devices, targeted suppression of areas using the enclosed lens mask
| Property | Value |
| Height: | 70 mm |
| Design: | Presence detector |
| Color: | white |
| Nominal voltage: | 230 V |
| RAL number (similar): | 9010 |
| Material: | Plastic |
| Mounting type: | Flush-mounted |
| Response brightness: | 5 to 2000 lx |
| Protection class (IP): | IP20 |
| Max. Switching capacity: | 2300 W |
| Voltage type: | AC |
| Max. range to one side: | 16.0 m |
| Scan angle: | 360 ° |
| Suitable for wall mounting: | no |
| Min. duty cycle: | 60 s |
| Max. Duty cycle: | 15 min |
| Anti-creep protection/rear field monitoring: | yes |
| Temperature: | -25 to 50 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | yes |
| Max. frontal range: | 5.5 m |
| Max. Inrush current: | 800 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 10.0 m |
| Surface finish: | matt |
| Material quality: | thermoplastic |
| Detection field diameter on floor: | 32 m |
| Number of switching zones: | 1 |
| Switch-off delay: | 300 s |
| Switch-on delay: | 30 s |
| Horizontal detection angle: | 180 to 360 ° |
| Frequency: | 50 Hz |
| Halogen-free: | yes |
| Constant light control: | yes |
| HVAC control: | yes |
| Forced shutdown: | yes |
| Animal corridor: | no |
| Networkable: | no |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote control: | yes |
| With Signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | yes |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Forced switching on: | yes |
| Suitable for ceiling mounting: | yes |
| Connection type: | Plug-in terminal |
| Antibacterial treatment: | no |
| Diameter: | 108 mm |
| Installation depth: | 24 mm |
| Installation diameter: | 60 mm |
| Min. depth of device box: | 24 mm |
