Presence detector with 360° detection range for ceiling mounting, surface-mounted/flush-mounted, range of up to 24 m in diameter at a recommended mounting height of 3 m, for independent control of 2 lighting zones (window area and interior area) depending on presence and daylight, additional switching contact (channel 3) HVAC for switching another light source or for controlling heating/ventilation/air conditioning depending on presence, both light channels and HVAC contact with 16 A high-performance relay (tungsten pre-contact), especially suitable for switching capacitive loads such as. B. EVGs, parallel compensated fluorescent lamps, compact fluorescent lamps, energy saving lamps, optimally suited for installation at great heights of up to 10 m, such as sports halls, warehouses etc., fixed factory program for immediate operational readiness, easy programming via remote control with 'blue mode' technology or via setting elements, integrated switch for setting via remote control or via setting controller - avoids incorrect operation and as sabotage protection, suppression of sources of interference by reducing the sensitivity via DIP switch, additional button input per channel with switching function 'room = ON + OFF/corridor = ON', detector can be used as a fully or semi-automatic device, standard version as a flush-mounted device, extension of the detection range by connecting slave devices, targeted suppression of areas using the enclosed lens mask
| Property | Value |
| Height: | 74 mm |
| Design: | Presence detector |
| Color: | white |
| Nominal voltage: | 230 V |
| RAL number (similar): | 9010 |
| Material: | Plastic |
| Mounting type: | Surface-mounted |
| Response brightness: | 5 to 2000 lx |
| Protection class (IP): | IP20 |
| Max. Switching capacity: | 2300 W |
| Voltage type: | AC |
| Max. range to one side: | 12.0 m |
| Scan angle: | 360 ° |
| Suitable for wall mounting: | no |
| Min. duty cycle: | 60 s |
| Max. Duty cycle: | 30 min |
| Creep-under protection/rear field monitoring: | yes |
| Temperature: | -25 to 50 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | no |
| Max. presence range: | 50.33 m² |
| Max. frontal range: | 5.5 m |
| Max. Inrush current: | 800 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 3.0 m |
| Surface finish: | matt |
| Material quality: | Thermoplastic |
| Detection field diameter on floor: | 24 m |
| Number of switching zones: | 1 |
| Switch-off delay: | 300 s |
| Switch-on delay: | 30 s |
| Horizontal detection angle: | 180 to 360 ° |
| Frequency: | 50 Hz |
| Halogen-free: | yes |
| Constant light control: | no |
| HVAC control: | yes |
| Forced shutdown: | no |
| Animal corridor: | no |
| Networkable: | no |
| Bypass switch: | no |
| Suitable for wireless transmission: | no |
| Remote control: | yes |
| With Signal unit: | no |
| Alarm function: | no |
| Teach function for response brightness: | yes |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| Suitable for C load: | yes |
| With DALI interface: | no |
| Forced switching on: | no |
| Suitable for ceiling mounting: | yes |
| Connection type: | Plug-in terminal |
| Antibacterial treatment: | no |
| Diameter: | 108 mm |
