The D mesh heating mat is a factory-assembled heating mat for controlling the temperature of floors, heating rooms or insulating walls from the cold in the protected area and has a nominal voltage of 24 V. The mesh heating mat's thickness of just 2.7 mm enables a low floor installation height. The heating mat is self-adhesive and the dipole design guarantees easy installation in the tile adhesive bed and almost magnetic field-free operation. The special processing guarantees 100% reliable, easy installation and high stability of the heating mat. On request, we are also happy to manufacture D mesh heating mats with size, voltage, power and shape to measure. Dipole heating conductor, nominal temperature: 90 °C, heating conductor thickness: 2.7 mm, protection class: IP X7, mesh grid: 12x12 mm, self-adhesive compliant, test mark: standard connection cable: 4 m, 2x1.0 (1.5) mm. RoHS and REACH compliant.
| Property | Value |
| Length: | 2050 mm |
| Width: | 500 mm |
| With controller: | no |
| Thickness: | 2.7 mm |
| Connected load: | 200 W |
| Area: | 1 m² |
| Power: | 200 W/m² |
| With carrier mat: | yes |
| With room thermostat: | no |
| Heating conductor load: | 13 W/m |
| Fixing of the heating conductor: | glued |
| Number of PTC thermistors: | 1 |
| Length of PTC thermistors: | 400 mm |
| Suitable for damp rooms: | yes |
| Suitable as roof heating: | no |
| Suitable as open-air heating: | no |
| With floor temperature sensor: | no |
| Self-adhesive: | yes |
| Design: | other |
| Connection voltage: | 24 V |
| Resistance: | 2.9 Ohm |
