The NST mesh heating mat is a factory-made heating mat that is mechanically and chemically resistant thanks to a very stable outer jacket and is therefore particularly robust. It is ideal for installation in chemically aggressive environments such as public toilets, bathrooms or paint shops, as well as anywhere where concentrated cleaning agents are used. The Teflon-insulated inner and outer insulation enables the heating cable to be extremely robust. The NST mesh heating mat is used to heat floors, heat rooms, insulate walls from the cold, and also as an open-air heating system for installation in a thin bed. The very low height of 3.3 mm enables a particularly low floor structure when renovating ramps, walkways and driveways. The dipole design guarantees easy installation in the tile adhesive and mortar bed, in GRP beds, and much more. The NST mesh heating mat has only one connection cable and the dipole heating conductor means it has very low magnetic fields. Outer and inner jacket: Teflon insulated, maximum temperature resistance up to 150 °C, heating conductor thickness: 3.3 mm, protection class: IP X7, grid spacing: 12.5x12.5 mm compliant, protective measure: FI protection circuit 30 mA, standard connection cable: 4 m, 2x1.0 (1.5) mm + protective braid.
| Property | Value |
| Length: | 16650 mm |
| Width: | 500 mm |
| With controller: | no |
| Thickness: | 2.7 mm |
| Connection power: | 2507 W |
| Area: | 8.33 m² |
| Power: | 300 W/m² |
| With carrier mat: | yes |
| With room thermostat: | no |
| Heating conductor load: | 22.5 W/m |
| Fixing of the heating conductor: | glued |
| Number of PTC thermistors: | 1 |
| Length of the PTC thermistor: | 4000 mm |
| Suitable for damp rooms: | yes |
| Suitable as roof heating: | no |
| Suitable as open-air heating: | yes |
| With floor temperature sensor: | no |
| Self-adhesive: | no |
| Design: | other |
| Connection voltage: | 400 V |
| Resistance: | 64 ohms |
