The ITR-80 thermostat is designed for mounting on a DIN rail, which allows for easy installation in the control cabinet. Four different modes can be programmed: heating, cooling, industrial or MAX/MIN mode. The device is universally designed for heating and cooling applications. Various control properties can be influenced by parameterization. The setpoint and all parameters of the controller are set using three control buttons. The LED signals the status of the control output. The thermostat is supplied with a voltage of 230 V. Incl. daily/weekly program, temperature range: -15 to °C, temperature sensor: NTC, sensor cable length: 3 m (can be extended to max. 50 m on site), space requirement: 2TE, switching current: 16 A, 1 relay contact, mounting: on standard mounting rail, digital switch input compliant.
| Property | Value |
| Version: | digital |
| Rated voltage: | 230 V |
| Rated frequency: | 50 Hz |
| Number of channels: | 1 |
| Text guidance in the display: | yes |
| 24 h program: | yes |
| Weekly program: | yes |
| Shortest temperature phase: | 30 min |
| Number of memory locations: | 4 |
| Number of basic programs ex works: | 3 |
| Holiday program: | no |
| Input for time program: | yes |
| Comfort setting range: | -15 to 75 °C |
| Setting range for reduction: | 5 °C |
| Setting range for frost protection: | 5 °C |
| Power reserve: | 50 h |
| Automatic summer/winter time changeover: | no |
| Operating mode switch: | yes |
| Switching preselection: | no |
| Rated switching current at 250 V, potential-free: | 16 A |
| Rated switching current at 230 V, not potential-free: | 16 A |
| Protection class (IP): | IP20 |
| Width in modular units: | 2 |
| Installation depth: | 70 mm |
| Contact design: | Opener |
| Sensor type: | Remote sensor |
| Class of temperature controller: | II |
| Power consumption in standby mode (solstandby): | 3 W |
