The Laminotherm heating mat LM is a factory-made heating mat for controlling the temperature of parquet, laminate and cork floors and also for heating well-insulated rooms. The heating system is installed floating. The reinforced aluminum fabric guarantees optimal heat distribution and prevents the formation of hot spots. The heating mat has low electrosmog and is very easy to install thanks to its 1.3 mm thin structure and dipole design. The Laminotherm heating mat is available with an output of 120 W/m. Nominal temperature: 90 °C, protective measure: FI, protective circuit 30 mA, heating conductor insulation: PFA, aluminum mesh thickness: 1 mm, system structure: compliant with IEC 60335, test mark: SEMCO, protection class: IP X7, for use in dry rooms, connecting cable: 5 m, 2x1.0 mm protective braid.
| Property | Value |
| Length: | 10000 mm |
| Width: | 500 mm |
| With controller: | no |
| Area: | 5 m² |
| Performance: | 120 W/m² |
| Thickness: | 1 mm |
| Connection power: | 600 W |
| With carrier mat: | yes |
| With room thermostat: | no |
| Heating conductor load: | 6 W/m |
| Number of PTC thermistors: | 1 |
| Length of PTC thermistors: | 5000 mm |
| Suitable as roof heating: | no |
| Suitable as open-air heating: | no |
| With floor temperature sensor: | no |
| Self-adhesive: | no |
