EVN LSTR810UNISet for IP20 stripes 8-10mm connection cable

The connection set includes a 150mm long connection cable and a direct connector. Both are simply pushed onto the soldering points of the respective LED strip, which means that additional cables do not need to be soldered on. Suitable for unicolor strips with a width of 8mm and 10mm. To ensure that the clip can be attached without any problems, the first chip on the strip must be at least 4mm away from the cut edge. This is usually the case with strips with a maximum of 120 chips per meter. The maximum load capacity is 36V and 5A.