Staircase lighting controller, for DIN rail, 17.5 mm wide, all connections can also be made below, 1 normally open contact for 16 A / 250 V AC, contact material AgSnO2, 3 functions: time range 0.5 to 20 min, continuous light switching and service function (if the button is pressed for longer than 5 seconds, the output contact closes for 60 minutes. Switches at zero voltage crossing, suitable for L and N circuits, lamp loads: incandescent and halogen lamps 3000 W, energy saving lamps 600 W, LED (230 V AC) 600 W, LV halogen lamps or LED with electronic ballast 600 W, LV halogen lamps or LED with conventional ballast 1500 W, fluorescent lamps with electronic ballast 1500 W, fluorescent lamps with conventional ballast 1000 W, connection voltage: 230 V AC
| Property | Value |
| Width in pitch units: | 1 |
| Off delay: | 0.5 to 20 min |
| Function: | electronic |
| Mounting type: | DIN rail |
| Control voltage 1: | 230 V |
| Rated switching current: | 16 A |
| Control voltage type 1: | AC |
| Surge function selectable: | no |
| Frequency of control voltage 1: | 50 to 60 Hz |
| Circuit type: | 3- and 4-wire circuit |
| Switch-off warning: | without |
| Follow-up switching: | can be switched on again + continuous light + time extension |
| Type of supply voltage: | AC |
| Installation depth: | 60.8 mm |
| Max. Switching current (cos phi = 0.6): | 12 A |
| Button glow lamp current: | 30 mA |
| Supply voltage: | 230 V |
| Max. incandescent lamp load: | 3000 W |
| Max. fluorescent lamp load: | 1500 VA |
| Max. fluorescent lamp load (duo circuit): | 1000 VA |
| Max. Fluorescent lamp load (parallel compensated): | 1000 VA |
| Number of contacts as normally open: | 1 |
