Staircase lighting controller (switch-on function), retriggerable, with zero-crossing circuit, for DIN rail, 17.5 mm wide, 1 normally open contact for 16 A / 250 V AC, contact material AgSnO2, time range 0.5 to 20 min. suitable for N circuit, the base point of the button and the L connection of the load are at point 3. Lamp loads: incandescent and halogen lamps 3700 W, energy-saving lamps 600 W, LED (230 V AC) 600 W, LV halogen lamps or LED with electronic ballast 600 W, LV halogen lamps or LED with conventional ballast 1500 W, fluorescent lamps with electronic ballast 1500 W, fluorescent lamps with conventional ballast 1000 W, connection voltage: 230 V AC All connections on the lower side. For retrofitting existing systems and as a replacement. The buttons must be suitable for switching the lamp load.
| Property | Value |
| Width in pitch units: | 1 |
| Off delay: | 0.5 to 20 min |
| Function: | electronic |
| Mounting type: | DIN rail |
| Control voltage 1: | 230 V |
| Rated switching current: | 16 A |
| Control voltage type 1: | AC |
| Current surge function selectable: | no |
| Frequency of control voltage 1: | 50 to 60 Hz |
| Circuit type: | 3-wire circuit |
| Switch-off warning: | without |
| Subsequent switching: | can be switched on later |
| Type of supply voltage: | AC |
| Installation depth: | 60.8 mm |
| Max. switching current (cos phi = 0.6): | 12 A |
| Button glow lamp current: | 25 mA |
| Supply voltage: | 230 V |
| Max. incandescent lamp load: | 3000 W |
| Max. fluorescent lamp load: | 1500 VA |
| Max. fluorescent lamp load (duo circuit): | 1000 VA |
| Max. Fluorescent lamp load (parallel compensated): | 1000 VA |
| Number of contacts as normally open: | 1 |
