Power relay for circuit boards for use in inverters or charging stations, 2 normally open contacts for 100 A (AC1), max. inrush current 300 A - 1 ms, bridge contacts, contact material AgSnO2, contact opening greater than 3.6 mm, nominal voltage 400 V AC, max. switching voltage 690 V AC, max. switching capacity AC1/AC7a (400 V AC) 40,000 VA (per contact), max. switching capacity AC15 (230 V AC) 4,600 VA, 1-phase motor load, AC3 operation (230 V AC) 2.2 kW, minimum switching load 1000 mW at 10 V/10 mA, ambient temperature -40 to + 70 °C at max. continuous contact current and control within the operating range, ambient temperature up to 85 °C in energy saving mode at. max. continuous contact current, control range and operation in the holding voltage range, rated coil power 2.9 W, minimum holding power 0.7 W, coil voltage 24 V DC, standard operation: operating range 0.90 to 1.1 x Un, in energy saving mode: 0.95 to 2.5 x Un (less than 1 s), holding voltage range 0.5 x Un, distance between circuit board and relay base plate for air circulation is 1.5 mm
| Property | Value |
| Number of contacts as normally open: | 2 |
| Rated control supply voltage Us at DC: | 24 V |
| Type of voltage for actuation: | DC |
| Design of the electrical connection: | PCB connection |
| Drive, polarity: | unpolarized |
| Height: | 62 mm |
| Width: | 52.5 mm |
| Depth: | 52.2 mm |
| Switching behavior of the drive: | monostable |
| Type of switching contact: | Single contact |
| With positively guided contacts: | no |
| With removable terminals: | no |
| Complete device with base: | no |
| Protection class (IP): | IP40 |
| Rated current: | 100 A |
| With LED display: | no |
