Gira 245000 S3000 Uni-LED rotary dimmer. Standard use

Uni-LED rotary dimmer. Standard insert [2450 00]
Universal LED rotary dimming insert Standard
Switching, pressing, dimming


Features:
- Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers
for halogen or LED lamps, dimmable inductive transformers for halogen or
LED lamps, HV LED or compact fluorescent lamps.
- Installation in device box according to DIN49073.
- Automatic setting of the dimming principle suitable for the load (leading edge or trailing edge).
- Lamp-friendly switching on.
- Switch-on brightness can be saved permanently.
- Switch-on with last set brightness or saved switch-on brightness.
- Minimum brightness adjustable.
- Electronic short-circuit protection.
- Electronic overtemperature protection.
- Operation with and without neutral conductor connection.

Technical specifications:
Nominal voltage: AC230V, 50/60Hz
Stand-by: max. 0.35W
Connected load at 25°C:
- HV-LED lamps: typically 3 to 60W
- Compact fluorescent lamp: typically 3 to 60W
- Incandescent lamps: 20 to 210W
- HV halogen: 20 to 210W
- Gira Tronic transformers: 20 to 210W
- electronic transformer with NV-LED: typically 20 to 60W
- wound transformer: 20 to 210VA
- wound transformer with NV-LED: typically 20 to 60VA
Cable length:
- Load: max. 100m
Installation depth: 24 mm
Ambient temperature: -5 °C to +45 °C

Notes:
- In principle, the dimmer can be operated without connecting the neutral conductor, but some LED and CFLi lamps require the neutral conductor to be connected to avoid flickering.
- When operating without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers increases to 50W.
- Do not connect HV LED or compact fluorescent lamps in combination with power boosters.
- Electronic transformers and ballasts for LED lamps can be operated using the dimming method specified by the manufacturer.
- If the voltage is higher, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers increases to 50W.
- In combination with power boosters, do not connect HV LED or compact fluorescent lamps.
- Electronic transformers and ballasts for LED lamps can be operated using the dimming method specified by the manufacturer.
- If the voltage is higher, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers increases to 50W.
If the ambient temperature is higher than 25°C, the connected load must be reduced.

Manufacturer: Gira
Order no. 2450 00