Gira 245500 S3000 Uni-LED rotary dimmer. Comfort insert

Uni-LED rotary dimmer. Comfort insert [2455 00]
Universal LED rotary dimming insert Comfort
Switching, pressing, dimming


Features:
- Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers
for halogen or LED lamps, dimmable inductive transformers for halogen or
LED lamps, HV LED or compact fluorescent lamps.
- Installation in device box according to DIN49073.
- Connection of extensions possible.
- Automatic or manual setting of the dimming principle suitable for the load
(leading edge or trailing edge).
- Display of the set operating mode via LED.
- Lamp-friendly switching on.
- Switch-on brightness can be saved permanently.
- Switch-on with last set brightness or saved
Switch-on brightness.
- Minimum brightness adjustable.
- Electronic short-circuit protection.
- Electronic overtemperature protection.
- Operation with and without neutral conductor connection.

Technical data:
Nominal voltage: AC230V, 50/60Hz
Stand-by: max. 0.35W
Connected load at 25°C:
- HV LED lamps (leading edge): typically 3 to 100W
- HV LED lamps (trailing edge): typically 3 to 200W
- Compact fluorescent lamp: typically 3 to 100W
- Incandescent lamps: 20 to 420W
- HV halogen: 20 to 420W
- Gira Tronic transformers: 20 to 420W
- electronic transformer with NV-LED: typically 20 to 100W
- wound transformer: 20 to 420VA
- wound transformer with NV-LED: typically 20 to 100VA
Extensions:
- rotary dimmer extension: 5
- unlit mechanical buttons: unlimited
- 2-wire extension insert: unlimited
Cable length:
- extension: max. 100m
- load: max. 100m
Installation depth: 24 mm
Ambient temperature: -5 °C to +45 °C

Notes:
- In principle, the dimmer can be operated without connecting the neutral conductor,
some LED and CFLi lamps require a neutral conductor to avoid
/> However, to avoid flickering, a neutral conductor connection is required.
- When operating without a neutral conductor, the minimum load for incandescent lamps,
HV halogen, Gira Tronic transformers and wound transformers increases to 50W.
- Do not connect HV LED or compact fluorescent lamps in combination with power boosters.
- Electronic transformers and ballasts for LED lamps can be operated using the dimming process specified by the manufacturer.
- If the ambient temperature is higher than 25°C, the connected load must be reduced.

Make: Gira
Order no. 2455 00