Gossen Metrawatt M525F PROFiTEST H+E for AC charging points function tester

Function tester for AC charging points in accordance with IEC 61851-1,0122-1. The PROFITEST H+E EASY CHECK is used to test AC charging points in charging mode 3 on a Type 2 socket or with a permanently installed Type 2 cable. To do this, simply connect the automatic function tester to the charging point and press a button to check the communication between the charging point and the EV. . With the PROFITEST H+E EASY CHECK, you can test AC charging points in charging mode 3 on a Type 2 socket or with a permanently installed Type 2 cable. To do this, simply connect the automatic function tester to the charging point and press a button to check the communication between the charging point and the EV. If the charging process cannot be started at an AC charging point, a malfunction of the AC charging point is usually suspected. The result: the operator immediately calls in a qualified electrician, even if the AC charging point is not the cause of the malfunction. With the PROFITEST H+E EASY CHECK function tester for AC charging points, even laypeople in electrical engineering such as system operators, service providers or caretakers can now safely check the functionality of the AC charging point in such a case. Specialist personnel are only called in if a malfunction is diagnosed. This saves you costs and time. For qualified electricians, in addition to the standard-compliant electrical test, the tester also offers the complete scope of the functional test without additional devices such as a multimeter or oscilloscope. Complete diagnosis of an e-charging station with just the push of a button Vehicle status evaluation PWM signal Short circuit between CP and PE phases and rotating field Battery status Simple operation and diagnosis Battery-operated compact device, therefore also suitable for outdoor use. With the PROFITEST H+E EASY CHECK function tester for AC charging points, even laypeople in electrical engineering such as system operators, service providers or caretakers can safely check the functionality of the AC charging point. Specialist personnel are only called in if a malfunction is diagnosed. This saves time and money. With the PROFITEST H+E EASY CHECK, electrical laypeople such as system operators, service providers or caretakers can safely test the functionality of AC charging points in charging mode 3 on a Type 2 socket or with a permanently installed Type 2 cable. Automatic function tester for AC charging points Also for AC charging points with a permanently attached cable Easy to use – even for electrical laypeople Automatic test sequence saves time and money Result in plain text on the display Error display with results for forwarding to the service USB interface for charging the battery. Automatic function tester for AC charging points in charging mode 3 Simulation of an EV at the charging point with Type 2 Inlet plug and charging points with a permanently attached cable Checking the values for 20 A cables and for 32 A cables Checking the vehicle states Status A, Status B, Status C, phases, tOFF (Status E), rotating field, duty cycle Result in plain text on the display Error display with results for forwarding to the service (internal memory for the current measured value) USB interface for charging the battery. 1x PROFiTEST H+E EASY CHECK (M525F) 1x charging cable (micro USB plug) 1x operating instructions