Current clamp sensor 10mA ... 100AAC, 100mV/A, ±2%. Low transmission errorsSuitable for power measuring devices due to small phase angle errorCompact and handyPermanently connected safety cablesVoltage output. Pointed beak cheeks for easier access when cables are tightly arranged. Compact and handy.. The WZ12B current clamp sensor was developed as an accessory for multimeters, power measuring and analysis devices, recording devices and data loggers. It enables the galvanically decoupled measurement of alternating currents within a wide range without disconnecting the current-carrying conductor.. Measuring rangeA AC 0.01-100 CAT@..V III 300 ConductorØ mm 15Ü factor 0.1 mV/mA Frequency range 45..65..500Hz Inherent deviation. ±(%vM+mV) 1.5% +1 mA . 1 current sensor1 permanently connected safety cable with connector plug1 operating manual
| Property | Value |
| Power measurement: | no |
| Current measuring range/AC: | 0.01 to 100 A |
| Clamp opening: | 15 mm |
| True RMS measurement (TRMS): | no |
| Leakage current measurement: | no |
| Harmonics measurement: | no |
| Measurement in Cable with forward and return conductor: | no |
| Version as adapter for connecting to multimeter: | yes |
| Interface: | no |
| Voltage measurement/AC: | no |
| Voltage measurement/DC: | no |
| Resistance measuring range: | no |
| Analog bar display: | no |
| Measuring circuit category: | CAT III |
