Gossen Metrawatt Z201B CP30 AC/DC 0-30ADC, 0-20AAC clamp current sensor

AC/DC clamp current sensor with voltage output for multimeter, 30A, 25mm Ø. The CP30, CP330, CP1100 and CP1800 current clamp sensors were developed for the precise, non-contact measurement of AC and DC currents as well as complex current signal forms (TRMS). Using the latest Hall effect technology, they are suitable for precise current measurement. Their properties make the Hall effect sensors a powerful instrument for measuring converters, switch-mode power supplies, industrial controls and other applications that require current measurement or signal form analysis. AC and DC current measurement for TRMS multimetersHigh accuracy 1%1 mA resolutionAutomatic switch-off to save batteryHigh bandwidth DC..20 kHzThe transfer factors can be set directly in the METRAHIT multimetersSimple zero adjustment at the touch of a button TYPE CP30 Measuring range 0 ... 30 A (1) Resolution 1 mA Overcurrent capability 500 A (60s) Gain drift /°C ±0.01% of. MW transfer factor 100 mV/A General DC accuracy ±1% of MW ±2mA Frequency range DC to 20 kHz (-1 dB) Clamp opening 25 mm Article number Z201B 1) DC or ACpk Operating voltage 300 V ACeff or DC MW = measured value. Power saving circuit: The device switches off automatically after approx. 10 minutes if no button is pressed during this time. The shutdown can be canceled. 1 AC / DC current sensor1 9 V alkaline battery1 operating instructions