AC/DC clamp current sensor with voltage output for multimeter, 100A /1000A, 32mm Ø. The CP30, CP330, CP1100 and CP1800 clamp current sensors were developed for precise, contactless measurement of AC and DC currents as well as complex current signal forms (TRMS).Using the latest Hall effect technology, they are suitable for precise current measurement. Their properties make the Hall effect sensors a powerful instrument for measuring converters, switched-mode power supplies, industrial controls and other applications that require current measurement or analysis of the signal form. AC and DC current measurement for TRMS multimetersHigh accuracy 1%100 mA / 500 mA resolutionAutomatic switch-off to save batteryHigh bandwidth DC..20 kHzThe transmission factors can be set directly in the METRAHIT multimetersSimple zero adjustment at the touch of a button TYPE CP1100Measuring range 0..100 / 1000 A Resolution 100 / 500 mA Overcurrent capability 2000 A (60s) Gain drift /°C ±0.1% of MW Transfer factor 10 / 1 mV/A General DC accuracy ±1% of MW ±100/500 mA Frequency range DC to 20 kHz (-1 dB) Clamp opening 32 mm Article number Z203B . Power saving circuit: The device switches off automatically after approx. 10 minutes if no button is pressed during this time. The shutdown can be canceled. 1 AC / DC current sensor1 9 V alkaline battery1 operating instructions
| Property | Value |
| Power measurement: | no |
| Current measuring range/DC: | 0.1 to 1000 A |
| Current measuring range/AC: | 0.1 to 1000 A |
| Clamp opening: | 32 mm |
| True effective value measurement (TRMS): | yes |
| Leakage current measurement: | no |
| Harmonics measurement: | no |
| Measurement in cable with forward and return conductors: | no |
| Version as adapter for connecting to multimeter: | yes |
| Interface: | no |
| Voltage measurement/AC: | no |
| Voltage measurement/DC: | no |
| Resistance measuring range: | no |
| Analog bar display: | no |
| Measuring range selection: | manual |
| Measuring circuit category: | CAT III |
