Grothe transformers 'MADE IN GERMANY' bell transformers are optimized for short-term use such as those found in bells, gongs, chimes and door openers in residential areas, safety transformers for continuous use. All transformers meet the highest environmental protection requirements, are tested according to EN61558 and have been validated.Product features:Installation in electrical distributors/flat distributors Fail-safe transformers meet the highest environmental protection requirements tested according to EN61558-2-8:2011 validated, marked with ENEC symbol for use throughout EuropeIn the event of improper use, a permanent failure occurs.Technical data:Primary 230 - 240V AC (50Hz) 90 x 36 x 55 mm (corresponds to 2 installation modules) Secondary: 8V AC (1.0A) Installation instructions:Note:Higher output voltage with low load or idle! After a short circuit, the secondary voltage is safely switched off. The transformer must be replaced. (for continuous loads we recommend the use of GROTHE safety transformers) Accessories surface-mounted installation set: including two cover caps for IP 20 Accessories surface-mounted installation set: including fastening rail and material for surface-mounted installation
| Property | Value |
| Type of transformer: | Standard bell transformer |
| Primary voltage: | 240 V |
| Width in pitch units: | 2 |
| Secondary voltage 1: | 8 V |
| Secondary current 1: | 1 A |
| Short circuit proof: | no |
| Lenght: | 90 mm |
| Width: | 36 mm |
| Height: | 55 mm |
| Max. output power: | 8 W |
| Suitable for series installation: | yes |
| Temperature protection: | no |
| Max. Output current: | 1 A |
| Max. power dissipation: | 0.1 W |
| With on/off switch: | no |
