Hager FG23WE series distribution board

Series distribution board IP41, protection class I, 850x2000x400mm (WxHxD), RAL7035. Modular cabinets IP 41, protection class I earthed, protection type IP 41, free-standing housing for single or series installation with removable rear and side panels, delivery without side panels, width 1 to 6 panels, 144 to 864 space units, for stationary indoor installation, interior fitting system can be installed for network systems: 3 AC 50 Hz 230/400 V, 3 AC 50 Hz 400/690 V with a maximum feed-in current of 2500 A, body: cabinet frame 1.5 mm galvanized sheet steel, paneling: cover plate and rear panel made of 1.25 mm hot-dip galvanized sheet steel, paneling: standard side panels (accessory) made of 1.25 mm sheet steel, flat side panels (accessory) made of 2 mm sheet steel, powder-coated and baked, busbar feedthrough through open side panels, can be flanged next to each other. Possibility of installation without skirting board, horizontal support rail for support rail stabilization included once, with coupling plates for support rail fastening, prepared for univers N interior fitting system, door made of 2 mm sheet steel, powder-coated and baked, surface-mounted with internal hinges, can be opened on the right or left. Opening angle of the door 120°, from width 1100 mm double door door lock with standard built-in four-point bar lock (single door) or 3-point bar lock (double door) with 3 mm double bit, can be exchanged for other locks, cable entries: 2 rows per field are punched at the top, open at the bottom, as accessories: bottom: - floor plate with brush - top: entry flanges (plastic) Standards and regulations tested according to 0660 Part 600-1, -2, -3, EN 61439-1, -2, -3, dimensions according to DIN 43870 protection class IP 41 according to 0470 Part 1 (DIN EN 60529) protection class IP 3x with open door, air and creepage distances according to 0110, Part 1 and 2/1.89, rated insulation voltage AC 800 V, overvoltage category IV, Pollution degree 3, insulation class II