Presence detector installation 1 channel KNX. 1 channel presence detector for ceiling installation for brightness and motion dependent switching. With integrated bus coupler for connection to the KNX bus. Basic setting possible directly on the already installed device without dismantling or optionally via the remote control EE807. Brightness range 5 - 1000 lux. Switch-off delay freely selectable between 5 seconds and 8 hours. Detection range: approx. 7 m (at installation height = 2.5 m). Functions: ON/OFF, dimming value, dimming value when present and absent, time functions, scene, scene when present and absent. Master/slave function for using several presence detectors in the room. The device can be programmed using the KNX ETS or KNX easy.
| Property | Value |
| Number of channels: | 1 |
| Optimal mounting height: | 4 m |
| Color: | white |
| Design: | Presence detector |
| Mounting type: | other |
| KNX bus system: | yes |
| Max. Range to one side: | 8 m |
| Max. range frontally: | 7 m |
| Horizontal detection angle: | 360 ° |
| Min. duty cycle: | 5 s |
| Max. Duty cycle: | 480 min |
| Vertical detection angle: | 55 ° |
| Detection field diameter on floor: | 7 m |
| Response brightness adjustable: | no |
| Teach function for response brightness: | no |
| Self-learning switch-off delay: | no |
| Bus system radio bus: | no |
| Bus system LON: | no |
| Bus system Powernet: | no |
| Other bus systems: | without |
| Material: | other |
| Material quality: | thermoplastic |
| Surface: | untreated |
| Surface finish: | matt |
| RAL number (similar): | 9010 |
| With bus connection: | no |
| Extension input: | no |
| Creep under protection/rear field monitoring: | no |
| Animal corridor: | yes |
| Staircase monitoring: | no |
| Transparent: | no |
| KNX radio bus system: | no |
| Bidirectional radio: | no |
| Operating mode switch: | no |
| Min. depth of the device box: | 30 mm |
