Switching/blind actuator 4/2-way, 4A, KNX. Switching output for switching 4 socket/lighting outputs or 2 blinds. To control lighting outputs, you can choose between ON/OFF, timer, safety off, forced control, lock, logic, preset, delay function or 64 scene functions per channel. With toggle function for time or continuous function. The blind function can be used to adjust the UP/DOWN/Stop movement command and the slat angle. Percentage control of the blind to move to a predefined position. The sun protection function can be used in conjunction with an external sensor to control the brightness per room. With alarm function to control the blind to a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block to control the output depending on the result of a logical connection. Preset, lock function, forced control. The device converts the bus information into corresponding commands. The outputs are switched via the system cable from the inputs assigned to them. All outputs have a manual operation on the device, which can also be locked, as well as a switching status display using an LED and an operating hour counter for each output. The device can be read out using a diagnostic tool. Labeling option directly on the device.
| Property | Value |
| Width in pitch units: | 4 |
| Max. number of switching outputs: | 4 |
| Mounting type: | REG |
| Protection class (IP): | IP20 |
| Max. Switching power: | 3200 W |
| Bus system KNX: | yes |
| Max. Switching current: | 4 A |
| Bus system radio bus: | no |
| Bus system Powernet: | no |
| With bus connection: | yes |
| Bus system LON: | no |
| Other bus systems: | without |
| On-site/manual operation: | yes |
| With LED display: | yes |
| Suitable for C load: | no |
| Rated current: | 4 A |
| Rated operating voltage: | 230 V |
| Different phases can be connected: | yes |
| Modular expansion option: | no |
| KNX radio bus system: | no |
| Bidirectional radio: | no |
| Removable bus module: | no |
| Output power: | 800 W |
