Room actuator 4/2-way 16 A normally open, manual, status, REG KNX light gray. Room actuator with 4 outputs for switching independent loads or controlling 2 drives, with 4 potential-free normally open contacts can also be parameterized as normally closed, any mixed operation of drive and switching functions possible, suitable for switching different external conductors, 2 additional electronic outputs (Triac) for connecting thermoelectric actuators 230V. For individual single room control. For continuous (PI) or switching (2-point) control, with emergency program e.g. in the event of a sensor or bus failure, 4 manual control buttons for on/off (up/down) and bus function on/off per channel/device, manual operation also possible without a bus e.g. on a construction site, with programming button and red programming LED, with 6 red status LEDs and 3 red LEDs as manual operation indicator, bus connection via connection terminal, with screw terminals.
| Property | Value |
| Width in division units: | 4 |
| Number of outputs: | 6 |
| Switching voltage: | 230 to 240 V |
| Bus system KNX: | yes |
| Max. Switching current (resistive load): | 0.16 A |
| Max. Output current: | 0.05 A |
| Protection class (IP): | IP20 |
| Bus system radio bus: | no |
| Bus system LON: | no |
| Bus system Powernet: | no |
| Other bus systems: | without |
| Mounting type: | REG |
| With bus connection: | yes |
| Control value continuous: | yes |
| Control value switching: | yes |
| Valve protection function: | yes |
| Manual switching: | yes |
| Bidirectional radio: | no |
| Removable bus module: | no |
| KNX radio bus system: | no |
