Roller shutter/blind actuator 12-way KNX, 230V. Roller shutter/blind actuator REG with integrated bus coupler for controlling drives, potential-free contacts and can be connected in multiple phases. 12 x roller shutter/blind control in up or down mode. The blind function can be used to adjust the UP/DOWN/STOP command and the slat angle. Percent control of the blind to move to a predefined position. The sun protection function can be used in conjunction with an external sensor to control the brightness per room. With alarm function for controlling the blind to a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block for controlling the output depending on the result of a logical connection. Preset, lock function, forced control. The device converts the bus information into corresponding commands. The outputs are switched via the system line from the inputs assigned to them. The device can be read out using a diagnostic tool. With programming button and red programming LED, bus connection via bus terminal, switching channels via box terminals. With manual operation and LED switching status display as well as the option to label directly on the device. Note: The device can be programmed using the ETS (from version 4).
| Property | Value |
| Mounting type: | REG |
| Max. number of blind outputs: | 12 |
| Type of current: | AC |
| Max. Switching capacity: | 900 W |
| Width in modular spacing: | 10 |
| Switching current ohmic: | 4 A |
| Protection class (IP): | IP20 |
| KNX bus system: | yes |
| Radio bus system: | no |
| Powernet bus system: | no |
| With bus connection: | yes |
| Bus system LON: | no |
| Other bus systems: | without |
| Local/manual operation: | yes |
| With LED display: | yes |
| Switching function: | no |
| KNX radio bus system: | no |
| Bidirectional radio: | no |
| Removable bus module: | no |
