Heating actuator 6-way KNX, for 24/230V actuators, Triac. Heating actuator (REG) with 6 electronic outputs (Triac) for silent control of electrothermal actuators for heating systems or cooling ceilings. Consists of a series-mounted device with integrated bus coupler, bus connection via KNX connection terminal, slide switch auto/manual, 6 manual buttons for open/close per actuator channel with status LED (default, short circuit, overload), programming button with integrated LED, labeling field and screw terminals for input and output voltages. Functions: Output voltage for compatible valves 230 V AC or 24 V AC, manual operation via slide switch of the channel with 0% - 50% - 100%. Diagnostic function via output with multi-colored LED and time/date programmable valve protection/pump seizure protection. Different values for summer/winter operation. 2 x logic block. Setpoints for normal, forced or emergency operation. Cyclic monitoring/detection of the input signals from thermostats (monitoring time approx. 45 min). If the thermostat is defective, the triac output is set to emergency operation. Note: The device can be programmed using the ETS (from version 5). Actuators with the same operating voltage must be connected to all actuator channels. Please note the installation instructions for heating construction/actuator manufacturers.
| Property | Value |
| Width in modular spaces: | 4 |
| Number of outputs: | 6 |
| Switching voltage: | 24 to 230 V |
| KNX bus system: | yes |
| Max. switching current (ohmic load): | 0.16 A |
| Max. Output current: | 0.16 A |
| Protection class (IP): | IP20 |
| Bus system radio bus: | no |
| Bus system LON: | no |
| Bus system Powernet: | no |
| Other bus systems: | without |
| Mounting type: | REG |
| With bus connection: | yes |
| Control value continuous: | yes |
| Control value switching: | yes |
| Valve protection function: | yes |
| Manual switching: | yes |
| Bidirectional radio: | no |
| Removable bus module: | no |
| KNX radio bus system: | no |
