The Easyclick module UNI dimmer receives its telegrams via the external Easyclick antenna module (D 450 ANT) and implements the set functions and parameters via its power components. The Easyclick modules are connected to one another via modular plug cables. The Easyclick module UNI dimmer is used to switch and dim lighting, taking into account various functions and parameters that can be selected via rotary switches. A function can be individually defined for each programmed transmitter. Standard function: 2-button function ON/OFF/DIM with memory. Selectable functions include: B. 2-button function with brightness preselection, 1-button function with memory, time functions, light scene control, etc. Technical data: Series-mounted device for snapping onto DIN rail 36 mm wide (2 HP) Power consumption standby = approx. 0.29 W, operation = approx. 20 mA/0.48 W Universal dimmer with 1 channel for R, L and C loads Minimum load 15 W and 20 VA, maximum 250 W and 200 VA. Rotary switch for functions and parameters LRN/CLR button, LED display, modular sockets including 30 cm connection cableProtection class IP 20 ApprovalsKEMA/KEURRequired accessories: Antenna D 450 ANT and power supply D 942 SPV or D 454 FU-SPV 4REG
| Property | Value |
| Width in modular units: | 2 |
| Mounting type: | REG |
| Number of outputs: | 1 |
| Output power: | 15 to 250 W |
| Voltage: | 220 to 240 V |
| Frequency: | 50 to 60 Hz |
| Design: | dimmer actuator |
| Load type: | universal |
| Protection class (IP): | IP20 |
| Power supplement usable: | no |
| KNX bus system: | no |
| Radio bus system: | yes |
| Bus system Powernet: | no |
| With bus connection: | yes |
| Bus system LON: | no |
| Other bus systems: | other |
| Extension input: | no |
| Local/manual operation: | yes |
| With LED display: | no |
| Parallel operation possible: | no |
| Bus system KNX-RF (Radio): | no |
| Bus module removable: | no |
| Radio bidirectional: | yes |
