The Homematic IP flush-mounted dimmer actuator is part of the Homematic IP smart home system and can be used to switch lights on and off as well as to dim them. The dimmer actuator is compact, so it can be easily installed in standard flush-mounted or surface-mounted boxes. Existing lighting systems can be modernized in just a few steps by using existing cables and can be controlled wirelessly in the future using a remote control, a wall switch or the free smartphone app. Since the actuator is a trailing edge phase dimmer, it is suitable for classic incandescent lamps, halogen lamps, dimmable energy-saving lamps and most dimmable LED lamps. The fully electronic trailing edge phase dimmer has been optimized especially for energy-saving lamps with a switching capacity of between 3 and 80 VA. The modern electronics make operation possible without any noise. If the dimmer has been integrated into a Homematic IP system, the light output can be conveniently dimmed in 0.5% increments.
| Property | Value |
| Type: | Switch |
| EAN: | 4047976506095 |
| Manufacturer No.: | 150609A0 |
| SmartHome: | compatible, Alexa, HomeMatic IP |
| Device properties: | Note, Type. Radio free field range 180 m, dimming method: trailing edge phase control, load type: ohmic and capacitive lamp load, cable type and cross-section: rigid and flexible cable, 0.75 - 1.5 mm² |
| Area of application: | Indoor |
| Dimming method: | Trailing edge phase control |
| Suitable for: | dimmable energy-saving lamps, incandescent lamps, LED, HV halogen lamps, NV halogen lamps |
| Protection: | Protection class, IP20 |
| Current: | Consumption, 350 A |
| Temperature range: | Operation, -10 - 55 °C |
| Connection type: | Radio |
| Radio: | Frequency up to 868 MHz |
| Feature: | Optimized for modern lamps and therefore particularly suitable for small loads (e.g. B. LED), Using the Homematic IP app, connected lights can be dimmed almost continuously in 0.5% increments, Fully electronic trailing edge phase dimmer avoids the noise generated by older dimmers |
| Further information: | Compact design for easy installation in flush-mounted boxes or in surface-mounted distribution boxes (e.g. ELS Spelsberg Abox 25, IP65) for use in basements or outdoor areas |
| Accessories: | available, operating instructions |
| Dimensions: | Width: 54 mm x Height: 33 mm x Depth/Length: 41 mm |
| Weight: | 31 grams |