JUMO 60003016 602025/0002-093-2000-10-8/707 Temperature monitor

Thanks to its galvanized sheet steel housing, the 1-pole mechanical built-in thermostat is very robust and can also be used under harsh conditions. The measuring system used works according to the gas expansion principle and can be used without problems up to a maximum permissible sensor temperature of 750 °C. The smooth round sensor made of high-quality stainless steel has a diameter of 8 mm and a sensor length of approx. 115 mm. The thermostat's long-distance line is also made of stainless steel and can be laid flexibly, provided a bending radius of 5 mm is observed. The maximum permissible ambient temperature at the switch head (protection class IP00) is 100 °C. The temperature compensation reduces the ambient temperature influence on the switch head to a minimum. The switch head is attached using a mounting bridge with two M3 x 22 screws. The desired switch-off temperature can be easily set on a scale using a screwdriver. The temperature monitor is characterized by a high switching point accuracy of +0/-18 K in the upper third of the scale. A key advantage is that no additional auxiliary power is required for temperature measurement. The electrical connection is made to the flat plugs (A 6.3 x 0.8 DIN 46244) of the switch set, which can directly switch a maximum permissible switching capacity of AC 230 volts / 16 A. The thermostat has a switching difference (hysteresis) of 50 to 80 K and automatically switches back to the original state when the switch-off temperature falls below this value. The temperature monitor is very flexible and is used in heating, air conditioning and ventilation technology as well as in the plastics industry, apparatus and furnace construction and for temperature monitoring in laboratories and climate cabinets. The device has EAC approval.