Jung 1201URE relay insert 1-channel

Relay insert, 1-channel Delivery is expected to be guaranteed until the end of 2019. Note: 'Energy saving lamps' generate very high current peaks when switched on, which can cause the switching contact to stick. Therefore, check the suitability of the lamps before use! Connection of extensions ('extension combination' possible): Extension insert '2-wire', item no.: 1220 NE Same functionality with short-stroke button (item no.: ..1561.07..) as on the relay insert. Number of extensions: unlimited Total cable length: max. 100 m Mechanical buttons (normally open, unlit) Short actuation: On, Off Number of extensions: unlimited Total cable length: max. 100 m Note: Extension operation is only possible if an 'attachment' is fitted on the main unit. Illuminated mechanical buttons must have a separate N terminal. Extension insert '3-wire', item no.: 1223 NE used with automatic switch item no.: ..1180.., ..1180-1.., ..1280.., ..1280-1.., presence detector item no.: PMU 360 .. or ceiling automatic monitor item no.: DAW 360 .. An automatic switch, presence detector or ceiling automatic monitor must also be used on the main unit. Otherwise it will not function! Number of extensions: max. 10 Total cable length: max. 100 m Technical data Nominal voltage: AC 230 V ~, 50, 60 Hz, N conductor required Connected load Incandescent lamps: 2300 W HV halogen lamps: 2300 W HV LED lamps: 400 W Electronic transformers: 1500 W Inductive transformers: 1000 VA Operate inductive transformers with at least 85% of the nominal load. Total load including transformer power loss must not exceed 1000 VA. Fluorescent lamps uncompensated: 1200 VA parallel compensated: 920 VA Duo circuit: 2300 VA Mixed loads of the specified load types. Connection: screw terminals max. clampable cable cross-section: 2 x 2.5 mm2 or 1 x 4 mm2 Test mark: Manufacturer: JUNG Item no.: 1201 URE