Staircase timer, 1 TE Intended use
Manual or automatic switching of lights in staircases
Mounting on top hat rail in accordance with DIN EN 60715 in sub-distribution board
Switching on using a pulse insert or button
Product features
Adjustable run-on time
Electronic overload protection for the control input
Four different operating modes can be set:
Automatic function without switch-off warning
Automatic function with switch-off warning
Light permanently switched on
Light permanently switched off
Automatic switching of lights
The pulse insert is combined with a motion detector. As soon as the brightness falls below a value set on the motion detector and movements are detected, the pulse insert cyclically sends a switch-on signal to the REG timer. This switches the light on for the set run-on time. Once the run-on time has elapsed, the REG timer switches the light off. After switching off, pulse inserts with motion detectors do not detect any movements for approx. 3 seconds.
| Property | Value |
| Nominal current: | 16 A |
| Nominal voltage: | 230 V |
| Mounting type: | DIN rail |
| Function: | On / off delays |
| Equipment: | 1 normally open contact |
| Dimensions: | 95 x 65 x 20 mm |
| Weight: | 109 g |
| Maximum switching capacity: | 2300 W |
| Special features: | Frequency: 50 Hz, 3- and 4-wire circuit |
| Width in pitch units: | 1 |
| Color: | gray |
| Material: | plastic |
| Voltage type: | AC |
| Other: | Connection: screw terminals |
