Jung 1701SE switching insert relay, 1-channel, with extension input

Switching insert relay, 1-channel, with extension input with extension input
for attachments eNet Art. Nos.: FM .. 1700 .., FM .. 1701 ..
for attachments LB-Management Art. Nos.: .. 1700 .., .. 1701 .., .. 1750 D .., .. 1751 BT .., .. 17180 .., .. 17280 .., .. 17181 .., .. 17281 .., DWPM 17360 .., .. 1790 D ..
for attachments KNX RF Art. Nos.: .. 10911 ST RF .., .. 10921 ST RF ..
Intended use
Switching of lighting and motors
Operation with suitable attachment
Control of electric underfloor heating and electrothermal actuators in combination with a room temperature controller attachment
Installation in device box with dimensions according to DIN 49073

Product features
Connection of extensions possible
Follow-up times adjustable
Test operation for functional testing
Adaptive zero point switching
Nominal voltage: AC 230 V ~
Mains frequency: 50/60 Hz
Standby power depending on attachment: approx. 0.1 ... 0.5 W
Switching current at 35 °C
Switching current motors: 6 A
Connected load at 35 °C
Incandescent lamps: 2300 W
HV halogen lamps: 2300 W
Electronic transformers: 1500 W
Inductive transformers: 1000 VA
HV LED lamps: typically 400 W
Fluorescent lamps uncompensated: 1200 VA
Capacitive load: 920 VA (115 µF)
Connection: screw terminals
single-core: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2
stranded without wire end ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2
stranded with wire end ferrule: 1 x 0.5 ... 4.0 mm22 x 0.5 ... 1.5 mm2
Installation depth: 24 mm
Ambient temperature: 25 ... +45 °C
Storage/transport temperature: 20 ... +70 °C
Number of actuators: 1 ... 10
Number of extensions
Extension 2-wire 1720 NE: unlimited
Extension 3-wire 1723 NE: 10
Buttons: unlimited
Follow-up time: none, 1 min, 5 min, 30 min, 60 min