Universal LED series touch dimmer, with extension input Intended use
Switching and dimming of lighting
Operation with suitable attachment
Installation in device box with dimensions according to DIN 49073
Product features
Two independent outputs for two lighting groups
Asymmetrical load distribution possible
Device works according to the phase leading or trailing edge principle
Automatic or manual setting of the dimming principle that suits the load
Display of the set operating mode using LED
Device can be operated without a neutral conductor
Switching on using a lamp-saving soft start
Switching on with the last set brightness or saved switch-on brightness
Switch-on brightness can be saved permanently
Minimum brightness can be saved permanently
Connection of extensions possible
Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
Electronic overtemperature protection
Test operation for functional testing
Performance extension through performance additives (Article No. ULZ 1755 REG) possible
Optional accessories: LED compensation module, item no.: KM LED 230 U
| Property | Value |
| Connection type: | Screw terminal |
| Wire cross section: | 0.5 to 4.0 mm² |
| Mounting type: | Flush-mounted |
| Phase control dimming: | yes |
| Phase control dimming: | yes |
| Nominal voltage: | 230.0 V |
| Operating mode: | Push button |
| Halogen-free: | yes |
| Composition: | Basic element |
| Load type: | universal |
| Series dimmer: | yes |
| Extension input: | yes |
| Light value memory: | yes |
| Can be used with button: | yes |
| Can be used with motion detector: | yes |
| Can be used with presence detector: | yes |
| Can be used with timer: | yes |
| Can be used with radio button: | yes |
| Can be used with IR button: | no |
| Mounting type: | Claw/screw mounting |
| Frequency: | 50.0 to 60.0 Hz |
| App control via Bluetooth: | no |
