KNX DALI gateway TW REG housing 4 TE
with electronic manual operation and LED status display
ETS product family lighting
Product type dimmer
Intended use
Control of lights and other applications with DALI operating devices in KNX installations, e.g. electronic ballast
Installation on top hat rail according to DIN EN 60715 in sub-distribution board
Product features
Control of max. 64 DALI participants in max. 32 groups
Setting the color temperature for lights with DALI Device Type 8 for Tunable White according to IEC 62386-209
Individual, group or central addressing
Suitable for operation in centrally supplied emergency lighting systems
16 light scenes
Effect control for dynamic light effects or color games
Read out DALI device status via KNX, e.g. brightness or light faults
Manual operation of the DALI groups
Forced control function
Feedback of switching status and brightness value in bus and manual operation
Collective feedback
Central switching function
Locking function for each DALI group
Separate switch-on and switch-off delay
Staircase light switch with pre-warning function
Corridor function: In combination with motion detectors, reduced continuous lighting if no movement is detected
Online or offline configuration of the DALI devices with ETS plug-in
Short-circuit protection
Overvoltage protection
Overload protection
Operating hour counter
Reporting of the global switching status of the DALI devices, e.g. for switching off the mains voltage of the DALI devices to avoid standby losses
Replacement of an individual DALI device during operation is possible without software
From device generation V02: DALI-2 certified
Linear or logarithmic dimming characteristic can be set
| Property | Value |
| Width in division units: | 4 |
| Mounting type: | REG |
| Bus system KNX: | yes |
| With LED display: | yes |
| Version: | Interface lighting system/DALI |
| Bus system radio bus: | no |
| Bus system Powernet: | no |
| LON bus system: | no |
| IR interface: | no |
| KNX radio bus system: | no |
