Rotary dimmer, 100 ... 1000 W with push-to-change switch
Intended use
Switching and dimming of incandescent lamps and HV halogen lamps
Installation in device box with dimensions according to DIN 49073
Suitable for mixed operation up to the specified total power
Product features
Dimming principle phase cut
Electronic short-circuit protection with permanent shutdown after 7 seconds at the latest
Electronic overtemperature protection
Changeover switching possible in combination with changeover switch
Optional accessories: LED compensation module, item no.: KM LED 230 U
Nominal voltage: AC 230/240 V ~
Mains frequency: 50 Hz
Ambient temperature: 5 ... +25 °C
Connected load at 25 °C
Incandescent lamps: 100 ... 1000 W
HV halogen lamps: 100 ... 1000 W
Power reduction
per 5 °C above 25 °C: 10 %
when installed in wooden or drywall walls: 15 %
when installed in multiple combinations: 20 %
Connection: screw terminals
single-wire: max. 4 mm²
| Property | Value |
| Connection type: | Screw terminal |
| Core cross-section: | 4.0 mm² |
| Mounting type: | Flush-mounted |
| Dimming phase control: | no |
| Dimming phase control: | yes |
| Operating mode: | Rotary/push button |
| Halogen-free: | yes |
| Composition: | Basic element |
| Load type: | ohmic load |
| Extension input: | yes |
| Light value memory: | no |
| Usable with button: | no |
| Can be used with motion detector: | no |
| Can be used with presence detector: | no |
| Can be used with timer: | no |
| Can be used with radio button: | no |
| Can be used with IR button: | no |
| Mounting type: | Claw mounting |
| Frequency: | 50.0 Hz |
