KNX switching actuator 8-way C-load with current detection
REG housing 8 TE
8 NO contacts with mechanical manual operation and status display
Full functionality is supported from ETS3.0d or higher.
ETS product family output
Product type binary output 8-way
Intended use
Switching electrical consumers AC 110 ... 230 V or AC/DC 24 V with potential-free contacts
Installation on top hat rail according to DIN EN 60715 in sub-distribution boards
Product features
Manual operation of the relays independent of the bus
NO or NC operation
Linking and forced operation function
Switching feedback (bus operation only)
Switch position display
Central switching function with collective feedback
Locking function for each Channel
Time functions: On and off delay, stairwell light switch with advance warning function
Integration into lighting scenes
Operating hours counter, configurable via bus
Input monitoring for cyclical updating with safety circuit
No additional power supply required
Current detection: Measurement of the load current for each output
Monitoring of threshold values for load monitoring, e.g. for reporting load failure
Switching of capacitive loads and the resulting high inrush currents
| Property | Value |
| Width in pitch units: | 8 |
| Max. Number of switching outputs: | 8 |
| Mounting type: | REG |
| Max. switching capacity: | 3680 W |
| KNX bus system: | yes |
| Max. Switching current: | 16 A |
| Bus system radio bus: | no |
| Bus system Powernet: | no |
| With bus connection: | yes |
| Bus system LON: | no |
| On-site/manual operation: | yes |
| With LED display: | no |
| Suitable for C load: | yes |
| Rated operating voltage: | 21 to 32 V |
| Different phases can be connected: | yes |
| Modular expansion option: | no |
| KNX radio bus system: | no |
