Hotel card switch (without button insert), Hotel card, LS series, aluminum for button item no.: 532 U
for illuminated buttons item nos.: 531 U, 533 U, 534 U
The hotel card switch is used to store the hotel card and to ensure a high level of security and energy savings, since when the hotel card is removed, any electrical consumers that may still be switched on are automatically switched off.
The hotel card switch is completed with a button from the JUNG range. We recommend button item no. 533 U with breaker-make contact and additional N terminal. The device works as a breaker or make contact depending on the connection.
The separate N terminal enables a glow, incandescent or LED lamp to be operated at the same potential. If the pilot lamp is not to be connected to the same potential, the normally open button item no. 534 U with a separate signal contact can also be used.
Installation instructions: No plaster compensation possible. Insert must be installed flush with the wall. The support ring must not be wallpapered over.
| Property | Value |
| Version: | Hotel card |
| Use: | Switch/button |
| Mounting type: | Clamp fastening |
| Suitable for bus system button coupling: | no |
| Suitable for protection class (IP): | IP20 |
| Color: | Aluminium |
| Halogen-free: | yes |
| Material: | Plastic |
| Material quality: | Thermoplastic |
| Surface finish: | matt |
| With label field: | no |
| With replaceable lens/symbol: | no |
| Scannable symbol/barrier-free: | no |
