Wallbox KeContact P30 x-series with M&E MeteringCharging station that complies with measurement and calibration law for billing your charging processesCharging station that complies with measurement and calibration lawWith charging socket type 2, 32 A, 3-phase, Mode 3Suitable for 1- or 3-phase AC chargingEasily configurable charging power: 2.3 - 22 kWGSM modem for communication with an OCPP host UMTSG4, LTE, WLANAuthorization via RFID cards possibleMax. charging power 10 A, 13 A, 16 A, 20 A or 32 A can be set via DIP switch Integrated DC residual current monitoringProtection class: IP54Color: silver/grayThe wallbox is to be protected on the mains side by an upstream residual current device (RCD) and an upstream circuit breaker (MCB) in accordance with local technical connection conditions, up to a maximum of 40 A. The residual current circuit breaker installed upstream in the on-site installation must be at least type A. Can be used as a stand-alone charging station or optionally as a master/slave variant, 1 x master max. 15 slaves with local load management.
| Property | Value |
| Height: | 516 mm |
| Width: | 240 mm |
| Depth: | 166 mm |
| Protection class (IP): | IP54 |
| Impact resistance: | IK08 |
| Nominal connected load: | 22 kW |
| Max. power per charging point: | 22 kW |
| System-side connection design: | 3-phase |
| Mounting type: | Wall mounting |
| Number of charging points: | 1 |
| Number of charging sockets type 2: | 1 |
| With energy meter: | yes |
