In energy chains or mobile machine parts, use in measuring, control and regulation circuits, load circuits of electrical equipment in automation technology, conveyor and assembly lines, production lines, in all types of machines, outdoors not without UV protection and only in compliance with the temperature range, tried and tested, good price/performance ratio, copper shielding to comply with EMC and protection against electromagnetic interference, additional robustness due to inner sheath, versatile application possibilities, extra-fine strand made of bare copper wires (class 6), core insulation: PVC, cores twisted in layers with short lay lengths, PVC inner sheath, grey, copper braid, tinned, fleece wrapping, sheath: PVC, grey (similar to RAL 7001), when used in energy chains: please observe assembly guidelines appendix T3, core and sheath based on 0245/0285, Low-adhesion surface, flame-retardant according to IEC 60332-1-2, EMC compliant,
| Property | Value |
| Number of cores: | 30 |
| Conductor nominal cross-section: | 0.5 mm² |
| Sheath color: | grey |
| Outer diameter approx.: | 16.5 mm |
| Conductor class: | Cl.6 = extra fine wire |
| Stranding element: | no |
| Material of the core insulation: | Polyvinyl chloride (PVC) |
| Core marking: | Numbers |
| Protective conductor: | yes |
| Shield over stranding element: | without |
| Shield over stranding: | Braid |
| Support element: | without |
| Sheath material: | Polyvinyl chloride (PVC) |
| Torsion protection: | no |
| Halogen-free according to EN 60754-1/2: | no |
| Flame-retardant: | according to EN 60332-1-2 |
| Low-smoke according to EN 61034-2: | no |
| Cold-resistant according to EN 60811-504+505+506: | yes |
| Oil-resistant according to EN 60811-404: | no |
| Perm. External cable temperature during assembly/handling: | 0 to 70 °C |
| Perm. Cable external temperature after installation without vibration: | -40 to 80 °C |
| Nominal voltage U0: | 300 V |
| Nominal voltage U: | 500 V |
| AWG size: | 22 |
| Conductor nominal cross-section (AWG): | 22 kcmil |
| Specification of core insulation: | other |
| Specification of sheath material: | other |
| Fire behavior class according to EN 13501-6: | without |
| Smoke development class according to EN 13501-6: | without |
| Drip behavior class according to EN 13501-6: | without |
| Acid development class according to EN 13501-6: | without |
| Shape: | round |
| Min. permissible bending radius, flexible use with forced guidance: | 123.75 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 66 mm |
