Lapp 0027931/500 ÖLFLEX SERVO FD 796 CP 4G1+ (2x1) TR500m PVC control cable with protective conductor

Connection cable between servo controller and motor, For use in assembly and placement machines, Especially in wet areas of machine tools and transfer lines, conveyor and assembly lines, production lines, in machines of all kinds, In energy chains or mobile machine parts, Indoors and outdoors, Allows faster movement sequences and thus increases the economic efficiency of machines, Copper braid to comply with EMC and shield against electromagnetic interference fields, Suitable for servo motor systems from well-known drive manufacturers, Longer cable lengths between converter and drive possible due to low-capacitance design, Insensitive to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media, Wide temperature range for use in harsh climatic conditions, Fine-wire strand made of bare copper wires (class 6), Core insulation: polypropylene (PP), Individual article design: Power wires without or with one or two separately shielded control wire pairs together in short lay lengths stranded, power cores with control core triplet stranded together in short lay lengths, fleece wrapping, tinned copper braid, polyurethane (PUR) sheath, orange (RAL 2003). When used in energy chains: please note assembly guidelines Appendix T3, Reg. No. 8591 (0027925, ..926, ..927, ..930 in preparation) UL AWM Style 20234 cULus AWM I/II A/B, 1000V 80° FT1 CSA AWM I/II A, 1000V 80° FT1, UL File No. E63634, oil-resistant, halogen-free materials, flame retardancy: UL/CSA: VW-1, FT1 IEC/EN: 60332-1-2, abrasion-resistant and notch-resistant,