Is particularly suitable for cabling data systems with transmission rates of up to 10 megabits per second and is suitable for the RS422 and RS485 interfaces, for fixed and partially flexible installation, UNITRONIC® Li2YCYv (TP) with reinforced, black outer jacket (Yv) with at least 1.8 mm nominal minimum average wall thickness is designed for indoor and outdoor use as well as for applications where reinforced outer jackets prove to be advantageous, Use in dry or damp rooms, Signal, control and measuring cable, for the transmission of weak, sensitive signals and high bit rates, 7-wire stranded conductor (UNITRONIC® Li2YCY (TP) and UNITRONIC® Li2YCYv (TP) ) can be used for Maxi TERMI-POINT® wiring, Decoupling of circuits through TP structure (crosstalk and crosstalk effects), Overall shield minimizes electrical interference, 7-wire strand made of bare copper wires, core insulation made of polyethylene (PE), tinned copper braid, outer jacket made of PVC, outer jacket color: pebble gray (RAL 7032), twisted pair (TP) structure, based on 0812, flame retardant according to IEC 60332-1-2,
| Property | Value |
| Number of cores: | 2 |
| Outer diameter approx.: | 8.5 mm |
| AWG cross-section: | 22 |
| Conductor class: | Class 2 = stranded |
| Stranding element: | Pairs |
| Core marking: | Color |
| Shield over stranding element: | without |
| Category: | other |
| Flame retardant: | according to EN 60332-1-2 |
| Low smoke according to EN 61034-2: | no |
| Sheath color: | gray |
| Conductor nominal cross-section: | 0.5 mm² |
| Stranding: | other |
| Material of the core insulation: | Polyolefins |
| Number of stranding elements: | 2 |
| Shield over stranding: | Braid |
| Conductor surface: | bare |
| Protective sheath: | no |
| Reinforcement: | no |
| Sheath material: | Polyvinyl chloride (PVC) |
| Halogen-free according to EN 60754-1/2: | no |
| Halogen-free according to IEC 60754-2: | no |
| Low smoke according to IEC 61034-2: | no |
| Oil-resistant according to EN 60811-404: | no |
| Oil-resistant according to IEC 60811-404: | no |
| Insulation integrity according to IEC 60331: | no |
| Functional integrity: | no |
| Permissible external cable temperature during assembly/handling: | -5 to 70 °C |
| Permissible Cable external temperature after installation without vibration: | -40 to 80 °C |
| Specification of core insulation: | Polyethylene (PE) |
| Cable longitudinally watertight: | no |
| Cable transversely watertight: | no |
| Specification of sheath material: | other |
| Fire behavior class according to EN 13501-6: | none |
| Smoke development class according to EN 13501-6: | none |
| Drip behaviour class according to EN 13501-6: | without |
| Acid development class according to EN 13501-6: | without |
| Min. permissible bending radius, flexible use/free movement: | 127.5 mm |
| Min. permissible bending radius, stationary use/permanently installed: | 51 mm |
| Laying in the ground: | no |
| UV-resistant: | no |
