The cable is preferably used where a high level of interference and mutual influence is to be expected. For fixed installation and flexible use. Dry and damp rooms, data processing, control and measurement technology, safety systems and as an electronic cable. For transmission with different signal levels of the cable circuits and with weak, sensitive signals. Decoupling of circuits through TP structure (crosstalk and crosstalk effects). Individually shielded wire pairs and the overall shield minimize electrical interference. Fine-wire strand made of bare copper wires. Wire insulation made of PVC. Wires twisted into pairs. Copper wrapping over pairs. Inner sheath made of PVC over shielded pairs. Tinned copper braid. Outer sheath made of PVC. Outer sheath color: pebble gray (RAL 7032). Based on 0812. Despite multiple shielding, the cable remains flexible. Flame retardant according to IEC 60332-1-2,
| Property | Value |
| Number of cores: | 4 |
| Outer diameter approx.: | 11.1 mm |
| AWG cross-section: | 24 |
| Conductor class: | Cl.5 = fine-wire |
| Stranding element: | Pairs |
| Core marking: | Color |
| Shield over Stranding element: | other |
| Category: | other |
| Flame retardant: | according to EN 60332-1-2 |
| Low smoke according to EN 61034-2: | no |
| Sheath colour: | grey |
| Nominal conductor cross-section: | 0.25 mm² |
| Stranding: | other |
| Material of the core insulation: | Polyvinyl chloride (PVC) |
| Number of stranding elements: | 4 |
| Shield over stranding: | Braid |
| Conductor surface: | bare |
| Protective jacket: | no |
| Reinforcement: | no |
| Jacket material: | Polyvinyl chloride (PVC) |
| Halogen-free according to EN 60754-1/2: | no |
| Halogen-free according to IEC 60754-2: | no |
| Low-smoke according to IEC 61034-2: | no |
| Oil-resistant according to EN 60811-404: | no |
| Oil-resistant according to IEC 60811-404: | no |
| Insulation integrity according to IEC 60331: | no |
| Functional integrity: | no |
| Perm. External cable temperature during assembly/handling: | -5 to 70 °C |
| Perm. Cable external temperature after installation without vibration: | -40 to 80 °C |
| Specification of core insulation: | other |
| Cable longitudinally watertight: | no |
| Cable transversely watertight: | no |
| Specification of sheath material: | other |
| Fire behavior class according to EN 13501-6: | none |
| Smoke development class according to EN 13501-6: | none |
| Drip behaviour class according to EN 13501-6: | without |
| Acid development class according to EN 13501-6: | without |
| Min. permissible bending radius, stationary use/permanently installed: | 66.6 mm |
| Laying in the ground: | no |
| UV-resistant: | no |
