Connection cable between frequency converter and motor, paper industry, chemical industry, heavy industry, in dry, damp and wet rooms, EMC-compliant construction of speed-controlled electrical drives in accordance with EN 61800-3, high power transmission for large drives, versions with a black outer sheath are suitable for laying outdoors and directly in the ground, longer cable lengths between converter and drive possible due to low-capacitance construction, earth-symmetrical 3+3 version supports the reduction of bearing currents, fine-stranded, bare copper conductor, core insulation: polyethylene (PE), cores concentrically stranded (symmetrical third-divided protective conductor in the 3+3 version is divided between the power cores to fill the gaps), shielding: aluminum-clad foil wrapping combined with tinned copper braid, 4-core version: optionally transparent or black PVC outer sheath, 3+3 core version: PVC outer sheath, black - cold-flexible, based on 0207 / 0250 / 0295, flame retardant according to IEC 60332-1-2,
| Property | Value |
| Main conductor nominal cross-section: | 70 mm² |
| Outer diameter approx.: | 40.3 mm |
| Sheath colour: | other |
| Number of main cores: | 4 |
| Design: | round |
| Material of core insulation: | Polyolefins |
| Main core identification: | Color |
| Protective conductor: | yes |
| Support element: | without |
| Torsion protection: | no |
| Sheath material: | Polyvinyl chloride (PVC) |
| Flame retardant: | according to EN 60332-1-2 |
| Perm. External cable temperature during assembly/handling: | -5 to 70 °C |
| Perm. Cable external temperature after installation without vibration: | -40 to 80 °C |
| Nominal voltage U0: | 0.6 kV |
| Nominal voltage U: | 1 kV |
| Oil resistant according to EN 60811-404: | yes |
| AWG size main conductor: | 00 |
| Main conductor nominal cross-section (AWG): | 00 kcmil |
| Specification of conductor insulation: | Polyethylene (PE) |
| Specification of sheath material: | other |
| Min. permissible bending radius, flexible use/free movement: | 604.5 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 161.2 mm |
